Description

Quiet | Sleek | Modern

Bundle Includes: IW25-4 ON Wall Dehumidifier and one extra washable MERV 8 air filter.

The IW25-4 on wall dehumidifier for home utilizes its integral humidistat to monitor the environmental conditions. When the relative humidity goes above the selected set point, the fixed dehumidifier system will energize. Air is drawn across an evaporator coil, which is cooler than the dew point of air. This means moisture will condense out of the air. The air is then reheated through the condenser coil and distributed back into the room. The ON Wall dehumidifier unit is designed for direct surface wall mounting.

The Energy Efficient IW25-4 on wall dehumidifier helps improve Indoor Air Quality (IAQ) by removing excess moisture from the air to maintain relative humidity (RH) below 60%. This unit also includes a Bi-Polar Ion Generator to further clean the air without adding ozone. The easy to install unit runs quiet, at 45 dBA, without sacrificing comfort or ambiance. The ON-Wall mounted dehumidifier is suited for both new construction and retrofit installations in multifamily, commercial, educational and industrial applications. The IW-25-4 ON Wall dehumidifier includes: IW25-4 dehumidifier base unit, 1 ON Wall front cover, 1 ON Wall washable air filter,  1 drain hose and clamp, 1 power cord, 1 front cover tool, 1 set of tamper resistant screws and 1 Operations Manual. The mounting screws are not provided with purchase because the type will vary with install surface. Our team is available to help find the best fit for the IW-25 On-Wall Dehumidifier.

Purchase this bundle with the IW25-4 In Wall Dehumidifier and an extra MERV 8 washable filter so maintaining your dehumidifier is a breeze – just replace your dirty filter with this extra replacement and you’re good to go. Don’t forget to wash out your dirty filter so it’s ready to reuse during the next maintenance cycle. 

For additional information, view our IW-25-4 On-Wall Specifications Sheet and ON-Wall Submittal Data Sheet.

Dimensions: 

On Wall Unit Base: 27.625” x 14.25” x 5.75”

ON Wall Cover: 27.5” x 14.125” x 1.5”

ON Wall Mounting Slots Distance: 6.2″

ON Wall Unit & Cover: 27.625” x 14.25” x 7.25”

Key Attributes

• Five-year Warranty
• Energy Efficient
• Bi-Polar Ion Generator
• Quiet and Easy Operation
• Easily Mounted ON Wall
• Simple Installation
• Hands-free and Tankless
• Tamper Proof Control
• Hard Wire Capable
• Independent of HVAC Systems or Condensate Drain
• Drains Directly into Existing Plumbing
• Installs between Studs (16″ on center)
• Microchannel Condenser Coil
• All Aluminum Evaporator Coil
• Minimal Maintenance
• Washable MERV 8 Filter
• Bundle includes one extra washable MERV 8 filter

For additional details or assistance, see IW-25-4 Operations Manual and/or contact Innovative Dehumidifier LLC.

Link to an electronic version of our TERMS OF CREDIT AND SALE.