Quiet | Sleek | Modern
Bundle Includes: IW25-4 IN Wall Dehumidifier; IW25-4 Condensate Pump; IW25-4 IN Wall Washable MERV 8 Air Filter
With only a few simple click you can purchase the IW25-4 IN Wall dehumidifier, with internal condensate pump and an additional MERV-8 filter.
The IW25-4 in-wall dehumidifier for homes utilizes its integral humidistat to monitor the environmental conditions. When the relative humidity goes above the selected set point, the dehumidifier will energize. Air is drawn across an evaporator coil, which is cooler than the dew point of air. This means moisture will condense out of the air. The air is then reheated through the condenser coil and distributed back into the room. The in-wall, self-contained dehumidification system is designed for recessed wall mounting. For semi-recessed applications an IDS Exterior Sleeve shall (sold separately) be used.
The Energy Efficient IW25-4 in-wall dehumidification unit helps to improve Indoor Air Quality (IAQ) by removing excess moisture from the air to maintain relative humidity (RH) below 60%. This unit also includes a Bi-Polar Ion Generator to further clean the air without adding ozone. The easy to install unit runs quiet, at 45 dBA, without sacrificing comfort or ambiance. The IN-Wall mounted or recessed dehumidifier is suited for both new construction and retrofit installations in multifamily, commercial, educational and industrial applications. The IW25-4 IN-wall dehumidifier bundle boasts low energy consumption and includes:1- IW25-4 dehumidifier base unit, 1- in-wall front cover, 2- in-wall washable air filter, 1-IW25-4 Condensate Pump, 1- drain hose and clamp, 1- power cord, 1- front cover tool, 1- set of tamper resistant screws and 1- Operations Manual. All dehumidifier parts are included with purchase. The mounting screws are not provided with purchase because they may vary with install surface; we suggest #6 x 2. Our team is available to help find the best fit for the IW-25 In-Wall Dehumidifier.
This triple bundle includes an extra MERV 8 Washable Filter and Condensate Pump for when gravity draining is not ideal.
IN Wall Dehumidifier Unit Base: 27.625” x 14.25” x 5.75”
IN Wall Cover: 30.375” x 17.25” x 1.5”
IN Wall Rough Opening: 28.0” x 14.5” x 5.75”
IN Wall Base Unit & Cover: 30.375” x 17.25” x 7.25”
- Energy Efficient
- Bi-polar Ion Generator
- Quiet and Easy Operation
- Easily Mounted/Recessed IN Wall
- Simple Installation
- Hands-free and Tankless
- Tamper Proof Control
- Hard Wire Capable
- Independent of HVAC Systems or Condensate Drain
- Drains Directly into Existing Plumbing
- Installs between Studs (16″ on center)
- Microchannel Condenser Coil
- All Aluminum Evaporator Coil
- Minimal Maintenance
- Washable MERV 8 Filter
- Bundle Includes Extra MERV 8 filter and Condensate Pump