Check out how the IW25 In-Wall Dehumidifier compares to the MD33 Dehumidifier.
MD33 | IW25 by Innovative Dehumidifiers | IW25 Difference | |
---|---|---|---|
Capacity | 33 ppd | 25 ppd | |
Coefficient of Performance (Amount of water extracted per KW of electricity used) |
2.0 L/kWh | 2.20 L/kWh | 10% more water removal per kilowatt of electricity used |
Voltage/Frequency | 120 Volt | 120V, 60 Hz | |
Noise | 46 dBA | 46 dBA | |
Dimensions WxHxL | 14.1875″ x 30″ x 5.75″ | 14.2″ x 25.25″ x 8.625″
*Excluding the drain fitting and hose |
Shorter cabinet height |
Weight | 39 lbs | 36 lbs | |
Controls | Digital humidistat control internally mounted behind tamper-proof cover | Digital controls behind tamper-proof cover |
|
Spaced For | Approximately 1,200 Square Feet | Approximately 1,500 square feet | 25% more coverage** |
Current Draw | 2.8 Amps | 2.5 Amps | 12% less Amp draw |
Power Consumption | 324 Watts | 240 Watts | 35% less electricity used |
Air Filter | washable | washable | |
List Price | $985 | $825* | 23.89% less expensive |
- Rated Average Power Consumption (at 80F/60%) – 240 watts
- Maximum Power Consumption (at 90F/95%) – 324 watts – 35% more electricity needed with the MD33
- Refrig – r134a
Quiet, short and affordable…IW25 is the clear choice.
MD33:
- More expensive.
- Physically taller due to split coils – takes up more space on the wall – more difficult to place under the typical wall HVAC.
- 33 pints per day is unnecessary. 20-25 pints is all you need under most conditions (again, unnecessary and uses more energy over a given period of time).**
IW25:
- IW-25 is THE FIRST in-wall dehumidifier and is available DIRECTLY for shipment through our professionally trained sales staff. Our sales professionals know the issues associated with apartments and tenant behavior. * Call for direct pricing (910) 579-3348
- Consumes less energy when run over the same period of time and creates less un-needed heat. Less heat & less energy consumed while running = lower electric bills = HAPPY HAPPY customers.
- Dimensions are shorter than the MD33. You are able to install the IW25 unit directly under a typical wall HVAC.
- Exceptionally quiet!
- 20-25 pints is all you need under most conditions. The 33 pints a day draw is unnecessary and uses more energy consumption.**
- Large drip pan that can accommodate condensation.
Innovative Dehumidifier Systems, LLC is the pioneer of the multifamily housing dehumidifier system, providing the solution to mold prevention in apartments.
Innovative Dehumidifier is a North Carolina based company founded by Brian Smith and Tom Honeycutt. They developed the signature IW25 to meet the building industry’s growing demand for an appropriate humidity solution for multifamily spaces. Their dehumidifier is ENERGY STAR® certified, and each IW25 unit is manufactured with special attention to safety and reliability.
**Under most conditions. Environmental and construction conditions vary greatly. No guarantees can be made that dehumidification can solve construction defects or extreme conditions.